SAE100 R1AT Hydraulic Hoses: Specifications, Applications, and Selection Guide

SAE100 R1AT is a single-wire-braid hydraulic hose used to convey compatible fluids in hydraulic systems. Its construction typically combines an oil-resistant synthetic-rubber tube, one layer of high-tensile steel-wire reinforcement, and a protective rubber cover. It may suit mobile and industrial equipment when its pressure rating, size, fluid compatibility, temperature range, and fitting arrangement match the actual operating conditions. For procurement, verify the product-specific datasheet rather than relying on the hose designation alone.

If you want to learn more, please visit our website.

Who This Guide Is For

This guide is for equipment manufacturers, distributors, maintenance teams, and project buyers comparing hydraulic hose options. It is especially useful when you need to check whether SAE100 R1AT can replace an existing hose or meet a new equipment specification. Final selection should be based on the system design and the manufacturer’s published data, not on a general description of the hose type. If the application has unusual pressure pulses, temperatures, or fluid chemistry, ask a qualified hose specialist to review the requirements.

What SAE100 R1AT Means

Basic construction and function

The “R1” designation identifies a hose construction with one steel-wire braid reinforcement layer under the SAE 100R1 hose family. The tube carries the hydraulic fluid, the wire braid provides reinforcement against internal pressure, and the outer cover helps protect the hose from its environment. The “AT” suffix is used in product specifications to identify a particular hose type or cover construction; buyers should confirm the manufacturer’s exact interpretation and applicable standard edition. The designation does not, by itself, state the working pressure for every hose size or guarantee suitability for every fluid.

Some suppliers describe SAE100 R1AT as a compact or thin-cover construction. Do not assume that every product labeled R1AT has identical cover dimensions or performance. Ask for the datasheet and confirm the outside diameter, minimum bend radius, working pressure, and any applicable test or compliance information. SAE 100R1AT and EN 853 1SN are often compared in purchasing, but one designation should not be treated as an automatic substitute for the other without checking the specifications.

Specifications to Check Before Ordering

Key technical data

Specifications vary by nominal bore, manufacturer, materials, and production requirements. A typical product description includes a synthetic-rubber tube, one high-tensile steel-wire braid, and a synthetic-rubber cover; the exact compound and construction details should be confirmed with the supplier. The following table highlights the data buyers should request rather than presenting universal ratings that may not apply to their selected size.

The examples of 1/4 in, 3/8 in, and 1/2 in refer to common nominal hose sizes; they are not a complete size range or a guarantee of availability. Likewise, -40°C to +100°C is a range shown for some product offerings, not a universal rating for every R1AT hose or fluid. Obtain the current technical sheet for the specific item being quoted, and check whether the rating applies to continuous or intermittent service. Where standards compliance is required, request the relevant documentation for the actual product.

Applications and Suitability

Common application areas

SAE100 R1AT hoses are used in hydraulic circuits on equipment such as agricultural machinery, construction equipment, material-handling systems, and industrial machinery. Typical functions may include connecting pumps, valves, cylinders, or other hydraulic components, subject to the system designer’s requirements. Suitability depends on pressure, fluid, temperature, movement, and the installation environment. A general application match is not a substitute for checking the equipment manufacturer’s specification.

XINCHI supply professional and honest service.

A single-wire-braid hose may be appropriate where the system design calls for that construction and the hose can be routed within its bend-radius limits. It may not be the right choice for every high-pressure, severe-pulsation, or demanding external-abrasion application. If the hose is exposed to repeated flexing, impact, chemicals, or heat, discuss those conditions with the supplier and consider whether another hose construction or additional protection is required. Do not select a hose solely because its nominal size matches the existing part.

How to Select the Right Hose

A practical selection framework

1. Record the system requirements. Document normal and maximum operating pressure, pressure pulses if known, fluid type, and operating temperature. Include the equipment maker’s requirements where available.
2. Confirm the size and routing. Match the required inside diameter and connections, then check available space, hose length, bend radius, and movement during operation. Avoid routing that forces a sharp bend or places tension on the assembly.
3. Check environmental exposure. Note abrasion, weather, heat, oil, chemicals, and potential impact. Ask whether the cover material is suitable for the actual environment and whether protective sleeving or another product type is needed.
4. Specify the complete assembly. Confirm the fitting series, connection dimensions, orientation, crimping requirements, and assembly instructions. A correct hose without compatible fittings is not a complete solution.
5. Review documentation before approval. Compare the supplier’s current datasheet with your requirements and clarify any missing pressure, temperature, or compliance information before placing an order.

Common selection mistakes

A frequent mistake is treating the maximum working pressure as the only pressure requirement. Pressure spikes, operating cycles, and the equipment’s safety requirements also need consideration. Buyers can also overlook fluid compatibility, assume that similar-looking standards are interchangeable, or ignore the minimum bend radius when planning routing. If any application detail is uncertain, provide it to the supplier before finalizing the specification.

Pricing, MOQ, and Lead Time

SAE100 R1AT pricing depends on factors such as hose size, order quantity, material and cover requirements, packaging, and whether the buyer needs cut lengths or finished assemblies. Minimum order quantities and production lead times vary by supplier, product availability, and order configuration. These details should be confirmed in a written quotation rather than assumed from a general catalog listing. For repeat purchasing, buyers can request a quotation against a defined specification and forecast quantity to support more consistent sourcing.

Supplier Evaluation Checklist

Before choosing a supplier, check whether it can provide clear product specifications for the exact size and construction you need. Ask for working pressure, temperature range, dimensions, bend radius, compatible fluid guidance, and the applicable product or test documentation. Confirm that the supplier understands your fitting, packaging, labeling, and delivery requirements. For custom or recurring orders, clarify the approval process for specification changes and how product identification will be maintained.

Summary and Next Steps

SAE100 R1AT is a single-steel-wire-braid hydraulic hose type that can serve a range of mobile and industrial hydraulic applications when selected for the system’s actual conditions. The essential checks are size, working pressure, fluid compatibility, temperature, bend radius, environment, and fitting compatibility. Ratings and dimensions vary between sizes and product offerings, so a designation alone is not enough to approve a hose. Use the manufacturer’s current datasheet and equipment requirements as the basis for your decision.

To evaluate an option, prepare the hose size, required length, fluid, operating pressure and temperature, connection details, and order quantity. XINCHI can support B2B buyers with product information and quotation discussions for rubber hose requirements. Share your application and purchasing specifications so our team can help identify the appropriate product details for review.

For more information, please visit SAE100 R1AT Hydraulic Hoses(ar,da,ru).